Kohler 1.1785.002 설치 매뉴얼 - 페이지 13

{카테고리_이름} Kohler 1.1785.002에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 1.1785.002 41 페이지. Thermostatic electric shower

4. For new installations a 30 mA Residual Current Device (RCD) must be

incorporated into the electrical supply to the shower in accordance with the current

wiring regulations. When replacing an existing electric shower we recommend

that a 30 mA RCD is incorporated in accordance with current wiring regulations

if not already provided.

5. A separate, permanently connected supply must taken from the consumer unit

to the appliance through a double-pole switch, which has at least 3 mm contact

separation. The switch can be a ceiling mounted pull cord type within the shower

room or a wall mounted switch in the applicable zone area.

6. DO NOT exert strain on the terminal block. Make sure that the electrical

connections are tightly screwed down.

7. DO NOT turn on the electrical supply until the plumbing has been completed.

8. Unless otherwise stated, electrical equipment such as extractor fans, pumps

must not be connected via this product.

Shower

Unit

Electrical Schematic Diagram

Double Pole

Isolating Switch

Consumer Unit

1306246-W2-D