Kohler 10257T 설치 지침

{카테고리_이름} Kohler 10257T에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 10257T 2 페이지. Handspray

페이지 인쇄

INSTALLATION INSTRUCTIONS

安装说明书

10257T 11621T 11639T 11640T 11641T 11642T 10257T-A

18526T 18527T 18528T 18529T 18530T 14788T 12861T

安装之前

所有的资料是按最新出版的产品资料编写而成。科勒

公司保留任何时候不经通知即可改变产品特性、包装

或产品可供类型的权利。

说明书包括重要的安装、保养及清洁方面的内容，请

把这些资料交给用户阅读。

注意事项：

1.一定要先彻底冲洗供水管以清除管道中的杂质。

2.花洒最高工作压力：0.5MPa(5bar)。水压超过

0.5MPa(5bar)须安装减压阀。花洒最高工作温度及

环境温度：60ºC。请特别注意花洒同花洒连接的臂

管须远离浴霸，否则可能损坏花洒及其密封件，甚至

对使用者造成伤害。

安装尺寸

G1/2˝

10257T

11621T

11639T 11640T 11641T 11642T 18526T

/10257T-A

安装步骤

对于11621T/11640T/11642T/

18526T/18527T/18528T/18529T/

18530T

将限流器(1)(18528T已带有限流器，

无需额外安装)如图示方向塞入花洒(2)

进水口，用垫片(3)(注意：对于 18527T

& 18528T

，使用5mm厚垫片。)连接花

洒与花洒软管(4)。

1064228-2-E

G1/2˝

BEFORE YOU BEGIN

All information is based on the latest product

information available at the time of publication. Kohler

Co. reserves the right to make changes in product

characteristics, packaging, or availability at any time

without notice.

Please leave these instructions for the consumer.

They contain important information.

NOTES:

1. Flush the water supply pipes thoroughly to remove

debris.

2. The highest working pressure for spray is 0.5MPa

(5bar). If it exceeds 0.5MPa(5bar), a pressure reducer

is needed. The highest water and environment

temperature is 60ºC. Please keep handspray, shower

head and the shower arm away from heater, or it may

become damaged and cause injury to the user.

ROUGH-IN DIMENSIONS

G1/2˝

18527T

18528T

18529T

G1/2˝

18530T

14788T

INSTALLATION

For 11621T/11640T/11642T/

18526T/18527T/18528T/18529T/

18530T

Put the restrictor(1)(The restrictor of

18528T has been inside, needn't manual

install) into the handspray(2) inlet as

shown. Connect shower hose(4) to

handspray with washer(3)(NOTE: For

18527T & 18528T, use the washer of

thickness 5mm. ).

Handspray

手持花洒

G1/2˝

12861T