A-Neuvideo ANI-2PIP-LOGO 사용 설명서 - 페이지 18

{카테고리_이름} A-Neuvideo ANI-2PIP-LOGO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neuvideo ANI-2PIP-LOGO 20 페이지. 2x1 hdmi multiviewer
A-Neuvideo ANI-2PIP-LOGO에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지)

페이지 인쇄

NEUVIDEO

• NETWORK TAB:

This tab provides access to control of the IP configuration and Login settings for the unit.

•

LOGIN: This section provides User Configuration options including changing the password for the Administrator account, and

setting an idle user logout timer. Click on "Save" to confirm and activate any changes made to these settings.

• SYSTEM TAB:

This tab provides firmware update functionality and, system configuration backup/restore functions.

■ System Configuration: The current system configuration, including routing and presets, may be saved as an XML file to a PC.

Click the "Download" button to save the current system configuration to your local PC. Previously saved system configurations

may be restored from a saved XML file. Click the "Choose File" button to locate the saved XML file, then click the "Restore"

button. Once the process completes the unit will automatically reboot.

• IP CONFIGURATION: The IP Address,

Netmask and Gateway can be set manually,

or DHCP can be enabled for automatic IP

Configuration if your local network supports it.

The Telnet Timeout can also be set, allowing

control of the length of inactivity time before

the unit releases its network connection with

a network connected control device. Click on

"Save" to confirm and activate any changes

made to these settings.

Note: If the IP address is changed then the IP

address required for WebGUI or Telnet access

will also change accordingly.

• SYSTEM: This section contains all controls

relating to firmware upgrades and system

configuration export.

■ Firmware Upgrade: To update the unit's

firmware, click the "Choose File" button to

open the file selection window and then select

the firmware update file (*.bin format) located

on your local PC. After selecting the file, click

the "Upgrade" button to begin the firmware

update process. Once the process completes

the unit will automatically reboot.

WebGUI Control