Kohler Dickinson K-6546 Series 설치 매뉴얼 - 페이지 8

{카테고리_이름} Kohler Dickinson K-6546 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Dickinson K-6546 Series 40 페이지. Apron front cast iron sinks
Kohler Dickinson K-6546 Series에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

페이지 인쇄

Sealant

Sink

Support Frame

4. Tile-In Installation

CAUTION: Risk of personal injury or product damage. Cast

iron sinks are very heavy. Get help lifting the sink into place.

Verify that the sink will ﬁt in the cabinet opening. If necessary,

sand the opening or add wood ﬁller strips.

Install the strainer or garbage disposal to the sink according to

the manufacturer's instruction.

Install the faucet to the sink according to the manufacturer's

instructions.

Apply a 1" (2.5cm) spot of sealant at each corner of the frame

where it will contact the sink.

NOTE: If using shims, additional sealant will be needed.

Carefully position the sink within the frame, making sure to

center the sink in the cabinet.

Optional: Apply sealant between the cabinet and the apron.

Verify that the sink is level. Adjust or shim between the sink and

support if needed.

Install the tile. To absorb vibration from a garbage disposal, apply

sealant between the sink and tile directly next to the sink rim.

This will prevent the grout around the sink from cracking.

Allow the sealant to cure for at least 30 minutes before

proceeding.

1019950-2-B

Mortar or Adhesive

Tile

Water Resistant Underlayment

Cabinet

Kohler Co.