Kohler ENGLEFIELD EXCLUSIVE Series 설치 지침 매뉴얼 - 페이지 7
{카테고리_이름} Kohler ENGLEFIELD EXCLUSIVE Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler ENGLEFIELD EXCLUSIVE Series 14 페이지. Round sliding
페이지 인쇄EXCLUSIVE SERIES
(f) Fix the top and bottom rails to the glass
panels. Use a power drill on a low torque
setting to drive 8 countersunk screws
into the top and bottom rails.
(supplied)
NOTE: Take care not to over tighten the screws.
COUNTERSUNK
ST 4.2 x 16mm
x 8
2.3 Retainer / Return Panel Seals
(a) Press fit 2 retainer seals into each
wall retainer. Ensure the seals are fitted
with the soft edge in contact with the
glass face.
Profile
Soft edge
of seal
Seals
Round Sliding
Wall
retainer
Return
Soft edge
of seal
Seals
INSTALLATION INSTRUCTIONS
(b) Cut the return seals to length leaving a
3-5mm notch at the bottom so that the
fexible tab overlaps the curved still
extrusion.
Profile
Notch 3-5mm of rigid portion at bottom
of seals so that the flexible tab overlaps
the sill extrusion (right hand seal shown).
(c) Press fit the return seals onto the
vertical edges of both return panels.
The flexible tab should face into the
shower.
2.4 Frame Alignment & Cover Clips
(a) Move the bottom rail forward or
backward to make sure that the gap
between the bottom rail and the front
edge of the tray is even.
=
Page 6
Flexible tab
Seals
=
=
ENGLEFIELD