Kohler FAMILY CARE K-22781T-1 설치 지침 - 페이지 2

{카테고리_이름} Kohler FAMILY CARE K-22781T-1에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler FAMILY CARE K-22781T-1 4 페이지. Vanity (rocker)

페이지 인쇄

ROUGHING-IN

Reference Value

Install the Basin

Note! The lavatory tops must be installed on a cabinet (refer

to Installation and User Guide packed with the cabinet for

installation details).

Recommend Kohler bathroom furniture for support or

decoration.

Rough-in the supplies and the drain piping.

NOTE:

The supply stop handles cannot extend more than

76mm from the finish wall when in the open position.

Drill two 10mm hanger bolt holes at the marks on the wall.

The nylon anchors is needed for concrete wall (supplied).

Mount hanger bolts to the wall so approximately 65-75mm

of each bolt remains exposed.

NOTE:

1. The distance from center of vanity drain hole to the

wall is 81mm(see roughing-in), and please choose

P-trap or S-trap according to the position and

dimension of the drain hole and space of the

cabinet.

2. Refer to Fig.2 for P-trap installation and Fig.3 for S-

trap installation. The positions shown are for

reference only, which can be adjusted according to

drain pipe type, cabinet structure and drain layout

of the house.

3. The height in Fig.2 and Fig.3 can be adjusted

according to actual height of the cabinet. Inlet of

hot water and cold water can be adjusted according

to installation conditions.

4. Other fastening devices of sufficient size and

strength may also be used.

1395235-T01-A

610

200

293

552

1000

Kohler reserves the right to change marked dimensions without prior notice.

K-22781T-1

136

185

558

380

171

Fig.#1

76mm

75mm

-2-

132

450

(

)

10mm

(

)

UNIT: mm

120

65-

81mm(

)