Kohler K-10284 설치 및 관리 매뉴얼 - 페이지 3

{카테고리_이름} Kohler K-10284에 대한 설치 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-10284 32 페이지. Showerheads
Kohler K-10284에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (17 페이지), 설치 및 관리 매뉴얼 (50 페이지)

페이지 인쇄

Inlet

Showerhead

1. Install the Showerhead

CAUTION: Risk of product damage. To avoid plugging the

showerhead spray outlets, use thread sealant tape on the shower

arm threads.

Remove the existing showerhead and thread sealant tape from the

shower arm, if applicable.

Apply thread sealant tape to the threads on the shower arm.

Run cold and hot water through the shower arm for several

minutes to ﬂush out dirt and debris.

Place the screen/washer with the tapered side down into the

showerhead inlet.

Secure the showerhead to the shower arm using a clean strap

wrench. Do not overtighten.

Pivot the showerhead to verify smooth operation.

Run water through the showerhead to check for leaks between

the shower arm and showerhead inlet. Adjust as needed.

Care and Cleaning

For best results, keep the following in mind when caring for your

Kohler product:

• Test First - Always test your cleaning solution on an

inconspicuous area before applying it to the entire surface.

• Do Not Let Cleaners Soak - Do not allow cleaners to sit or soak

on the product.

Kohler Co.

Apply thread sealant tape.

Screen/Washer

1054642-2-B