Kohler K-10430 설치 매뉴얼 - 페이지 4

{카테고리_이름} Kohler K-10430에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-10430 20 페이지. Kitchen sink faucets
Kohler K-10430에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (17 페이지), 설치 매뉴얼 (21 페이지), 설치 및 관리 매뉴얼 (21 페이지)

페이지 인쇄

Spray Hose

Outlet

Escutcheon

Gasket

2. Install the Faucet

IMPORTANT! When mounting the faucet to uneven surfaces, such

as tile grout lines, apply a suitable sealant in addition to the gasket

provided. The sealant will reduce the risk of water seepage under

the faucet.

Slide the escutcheon and gasket to the spout.

Partially thread two screws into the threaded ring until they

protrude slightly from the backside of the threaded ring.

Apply thread sealant to the spray hose outlet threads.

Slide the threaded ring and metal washer onto the handspray

hose.

Run the handspray hose up through the spout mounting hole,

then connect and tighten the handspray hose to the spray hose

outlet.

Position the spout in the desired mounting position.

Slide the metal washer onto the shank from the underside of the

sink.

Thread the ring up the shank until it is about 1/4" (6 mm) away

from the underside of the sink. Ensure the screw holes face the

front and back of the faucet.

Tighten the screws.

1036178-2-F

Spout

Handspray

Sink

Washer

Ring

Screws

Kohler Co.