Kohler K-10552 설치 매뉴얼 - 페이지 4

{카테고리_이름} Kohler K-10552에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-10552 36 페이지. Accessories
Kohler K-10552에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (16 페이지)

Wall Plate Hole Locations

1-1/4" D.

Wall Plate

(3.2 cm)

Holes

5/8" R.

(1.6 cm)

2. Prepare the Site — Wall Plate(s)

Determine the desired mounting location.

Mark the vertical and horizontal center lines for the accessory to

be installed. Consult the roughing-in diagrams to determine the

dimensions.

When installing multiple-post accessories, measure the accessories

so you can provide the required distance between the center

points.

Use a level to ensure that all center points are level.

3. Mark and Drill the Pilot Holes

Mark the pilot hole locations vertically 5/8" (1.6 cm) above and

below the center point or center points.

Vertically align the holes on each wall plate.

If the installation requires multiple posts, conﬁrm that the center

points are even using a level.

NOTE: There is no provision for later adjustment if the center points

and resulting pilot holes for multiple post accessories are not level.

Select a drill and 5/16" drill bit that are appropriate for the wall

material you will be drilling through.

Carefully drill a 5/16" hole at all marked pilot hole locations.

1023327-2-B

Kohler Co.