Kohler K-10555 설치 매뉴얼 - 페이지 5

{카테고리_이름} Kohler K-10555에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-10555 36 페이지. Accessories
Kohler K-10555에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (16 페이지)

4. Anchor Installation

NOTE: You may need to disassemble some of the accessories. Some

accessories will be packed with the wall plate installed in the post.

Loosen the setscrew and remove the wall plate if needed.

Press and hold the legs of a wall anchor (provided) together and

insert the wall anchor legs into the hole. Insert all wall anchors

into the pre-drilled mounting holes.

With a hammer, carefully tap each wall anchor until they are

ﬂush with the ﬁnished surface.

If the wall anchor was inserted into a space between the studs, it

will be necessary to spread the wall anchor legs.

Repeat for all wall anchors inserted between studs.

Ensure that the wall anchors are ﬂush with the ﬁnished surface.

Orient the wall plate with the large slotted mounting hole up and

the smaller hole under the higher anchor.

Secure the wall plate with the supplied panhead screws.

Repeat at each wall plate location.

Kohler Co.

1023327-2-B