Kohler K-113 설치 매뉴얼 - 페이지 3

{카테고리_이름} Kohler K-113에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-113 12 페이지. Trip lever

Trip

Lever

Install New Trip Lever

Remove the tank cover from the toilet.

Remove the locknut and trip lever assembly from the toilet.

Install the new ﬂange into the tank hole.

Attach the support to the ﬂange with support arms facing inside

the tank.

Attach the locknut. Tighten hand tight only.

Install the trip lever into the hole of the ﬂange.

While holding the trip lever in a horizontal position, slide the

arm onto the trip lever as far as it will go (the arm should be

positioned between the two prongs of the support).

Tighten the setscrew.

Align the trip lever in horizontal position by rotating the support.

Carefully tighten the locknut to secure assembly to toilet tank.

Hook the ﬂapper ball chain to the hole in the trip arm.

Check for proper chain length and adjust as needed.

Kohler Co.

Locknut

Setscrew

Locknut

Stem

Antique

Trip Lever

Arm

Support

Flange

Stem

IV Georges Brass

Trip Lever

105376-2-BC