AEG 7000 Series 사용자 설명서 - 페이지 17

{카테고리_이름} AEG 7000 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 7000 Series 49 페이지.
AEG 7000 Series에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지), 사용자 설명서 (44 페이지), 사용자 설명서 (32 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (36 페이지)

AEG 7000 Series 사용자 설명서
max. 105°
1
2
E
D
C

Hinges

To mount the hinges it is necessary to drill
two holes (dia. 35 mm, depth 12.5 - 14 mm
depending on the depth of cupboard door)
on the inner side of the door.
The hinges will be fixed to the door by
means of the four supplied screws A.
A

Mounting the door

Fix the hinges to the hinge supports on the
appliance by means of the two supplied
screws B.

Counter-magnet

The appliance is pre set for a magnetic
closure.

For a correct closure:

N
1. Position the screw C and the counter-
2. Open the cupboard door and screw the
To align the door perfectly,
make sure that the edge of
cupboard door is parallel with
the appliance edge and to
respect the proper opening
angle (max. 105 °).
The hinges can be adjusted to
compensate for possible
uneven thickness of the door.
magnet D on the magnetic plate N. Lean
the cupboard door against the screw
until it leaves a mark.
counter-magnet D (steel disk + rubber
ring E) with the screw C in the inner side
of the cupboard door, where the screw
left the mark as described in the first
step.
ENGLISH
17