Kohler K-11830 설치 매뉴얼 - 페이지 4

{카테고리_이름} Kohler K-11830에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-11830 28 페이지. Wall-mount lavatory faucet valve
Kohler K-11830에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (21 페이지)

페이지 인쇄

Plaster Guard

3. Install the Suppy Pipe and Sensor Wire

Install 1/2" supply pipe to the valve assembly.

At the point where the supply will exit the wall, install a drop ear

ell ﬂush or slightly behind the ﬁnished wall.

Feed the sensor wire through the sensor mount and plaster

guard, leaving 1-1/2" (3.8 cm) minimum of exposed wire hanging

out.

Connect the sensor wire harness to the wall.

Temporarily connect the water supply to the supply ell.

Turn on the water.

Check the system for leaks.

4. Finish the Wall

Install the ﬁnished wall.

Make sure holes are created for the sensor wire harness. Location

is optional.

The diameter of the sensor hole cutout is 1-3/8" (3.5 cm).

1080064-2-A

Secure wire

harness to the wall.

1-1/2"

(3.8 cm)

Ell

Kohler Co.