AEG KO-LAVAMAT 88840 사용자 설명서 - 페이지 40

{카테고리_이름} AEG KO-LAVAMAT 88840에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG KO-LAVAMAT 88840 48 페이지. Aeg prosteam condenser dryer user manual

Installation

3. Pull slightly rack handle (not to the end).

Grasp at it harder and lift it up.

For easiest unpacking turn the rack

upside down

4. Take it carefully out of the drum.

5. Remove from the drum rest of packing

elements.

Electrical connection

Details on mains voltage, type of current and the fuses required should be taken from the

rating plate. The rating plate is fitted near the loading aperture (see "Product description"

chapter).

Connect the machine to an earthed socket, in accordance with current wiring regulations.

WARNING!

The manufacturer declines any responsibility for damage or injury through failure

to comply with the above safety precautions.

Should the appliance power supply cable need to be replaced, this must be carried

out by our Service Centre.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the

fuse in the plug supplied, a 13 amp ASTA approved BS 1363/A fuse must be used.

The wires in the mains lead are coloured in ac-

cordance with the following code:

Blue - Neutral

cord clamp

Brown - Live

Green and Yellow - Earth

The wire coloured green and yellow must be con-

nected to the terminal marked with the letter «E»

or by the earth symbol

yellow.

The wire coloured blue must be connected to the

terminal «N» or coloured black.

The wire coloured brown must be connected to

the terminal marked «L» or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp

must be secure over the outer sheath.

WARNING!

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard.

Ensure that the cut off plug is disposed of safely.

or coloured green and