Kohler K-13139 설치 매뉴얼 - 페이지 5

{카테고리_이름} Kohler K-13139에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-13139 36 페이지. Single-control bath and shower trim
Kohler K-13139에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (21 페이지)

페이지 인쇄

Shower

Elbow

Apply

Plumbers

Putty.

2. Install the Showerhead, If Used

CAUTION: Risk of product damage. To avoid plugging the

showerhead spray outlets, use thread sealant tape on the shower

arm threads. Do not use thread sealant compound (pipe dope).

Remove the temporary nipple from the shower elbow.

Apply a bead of plumbers putty or other sealant to the back of

the bonnet according to the manufacturer's instructions.

Slide the bonnet onto the shower arm.

Apply thread sealant tape to the threads and install the shower

arm to the shower elbow.

Carefully tighten with a clean strap wrench.

Press the bonnet and escutcheon against the wall and secure to

the shower arm by tightening the setscrew.

Remove all excess putty.

With the showerhead off, ﬂush out the system.

Ensure that the screen is positioned as shown on the showerhead.

Apply thread sealant tape to the shower arm and thread the

showerhead to the shower arm.

Use a clean strap wrench to tighten the showerhead.

Check for proper operation.

Kohler Co.

Bonnet

Shower Arm

Escutcheon

Screen

Apply Thread

Sealant Tape.

Showerhead

1036140-2-A