AEG LAVATHERM 56840L 사용자 설명서 - 페이지 12

{카테고리_이름} AEG LAVATHERM 56840L에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 56840L 28 페이지.

Daily use

– anti-crease phase and when phase starts or ends

– cycle interruption by a warning

– alarm

To activate it:

1. Choose the drying programme.

2. Press BUZZER button - the led above is on.

To deselect function press again BUZZER button.

Led above is off.

TIME function

To select the programme duration after setting the TIME programme. You can select a

programme duration from 10 mins to 3 hrs in 10-minute steps.

1. Turn the programme knob to the TIME programme. The blinking 10' appears in the

display. (corresponding to the COOLING programme).

2. Press the TIME button repeatedly until the

desired programme duration is shown in

the display, e.g. 20 for a programme of 20

minutes.

If the programme duration is not selected, the

duration is automatically set to 10 mins.

With the DELAY START button, you can delay the start of a programme by between

30 minutes (30') and a maximum of 20 hours (20h).

1. Select the programme and additional functions if necessary.

2. Press the DELAY START button as many

times as necessary until the required start

delay appears on the display, e.g. 12h if

the programme is to be started in 12

hours.

If the display is showing 20h and you

press the button again, the time delay will

be cancelled. The display will show 0' and

then the duration of the selected pro-

gramme.