AEG LAVATHERM 57800 사용자 정보 - 페이지 22

{카테고리_이름} AEG LAVATHERM 57800에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 57800 32 페이지. Condensation dryer

Programming options

Objective

Permanently programme

in the audible signal

which reminds you that

the programme is com-

plete.

Adjust "level of dryness"

detection:

If the laundry is slightly

drier or slightly damper

at the end of the pro-

gramme than with the

standard setting.

To deactivate the EMPTY

WATER display when us-

ing an external drain for

the condensed water.

1. Turn the programme selector to any programme.

2. Press the AUDIBLE SIGNAL button and hold down for

approx. 5 seconds.

A brief signal sounds several times. The AUDIBLE SIGNAL

display flashes several times.

The setting is permanently programmed.

The setting is cancelled as described under 1 and 2.

1. Turn the programme selector to any programme.

2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the

same time and hold down for approx. 5 seconds.

The current setting appears on the multi-display:

– C0: Setting for drier laundry

– C1: Standard setting

– C2: Setting for damper laundry

3. Press the START/PAUSE button until the setting required

appears on the multi-display.

4. Turn the programme selector to OFF.

The setting is permanently programmed.

1. Turn the programme selector to any programme.

2. Press the DOOR and SPECIAL CARE buttons at the same

time and hold down for approx. 5 seconds. The multi-

display briefly displays "0"

The EMPTY WATER display is permanently deactivated.

The setting is cancelled as described under 1 and 2; the

multi-display however briefly displays "1" (rather than

"0").

Implementation