AEG LAVATHERM 65170AV 사용자 설명서 - 페이지 24

{카테고리_이름} AEG LAVATHERM 65170AV에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 65170AV 27 페이지.
AEG LAVATHERM 65170AV에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (40 페이지)

페이지 인쇄

5. Unscrew hinge A from the load

door and turn it through 180°, then

put on the opposite side and screw

down.

6. Turn cover plates B through 180°

and put them on the opposite side.

7. Unscrew cover plates D from the

front of the appliance, turn through

180° and screw down on the oppo-

site side.

8. Unscrew door lock E, push down

lightly and remove from the front of

the appliance.

9. Push snap-in button F in and down,

push cover down lightly and re-

move from front of the appliance.

10. Change door lock E above to the

opposite side, screw down the

door interlock.

11. On the other side, put cover F and

let snap-in button to lock into posi-

tion.

12. Put load door and hinges into re-

ELECTRICAL CONNECTION

• Connect the appliance to a groun-

ded socket. Refer to the applicable

electrical requirements.

• Make sure that the electrical data on

the rating plate agrees with the pow-

er supply.

• Always use a correctly installed

shockproof socket.

• Do not use multiple plugs and exten-

sion cables. There is a risk of fire.

• All replacements of power supply ca-

ble must be carried out by our Serv-

ice.

• Make sure not to squash or cause

damage to the mains plug and cable

behind the appliance.

• Do not pull the mains cable to dis-

connect the appliance. Always pull

the mains plug.

• The plug must be dry.

The data about mains voltage, type of

current and the necessary fuse are on

the rating plate and in the "TECHNI-

CAL INFORMATION" chapter. The rat-

ing plate is behind the load door (see

the "PRODUCT DESCRIPTION" chap-

ter).

The appliance has a power supply ca-

ble with plug fitted with 13 A fuse. If

necessary, replace the fuse in the plug

by 13 A ASTA BS 1363/A approved

fuse.

The wires in the power supply cable are

coloured as follow:

cesses on the front of the appliance

and screw down.

Note regarding contact pro-

tection: The appliance is only

secure for operations again

once all plastic parts have been

put.