AEG LAVATHERM 7041 TK ELECTRONIC 사용자 정보 - 페이지 23

{카테고리_이름} AEG LAVATHERM 7041 TK ELECTRONIC에 대한 사용자 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 7041 TK ELECTRONIC 32 페이지. Condensation dryer

Programming options

Objective
Permanently program in
the audible signal which
reminds you that the
programme is complete.
Adjust detection of de-
gree of drying:
If the laundry is slightly
drier or slightly damper
at the end of the pro-
gramme than with the
standard setting.
If the EMPTY WATER (BE-
HÄLTER) display is to re-
main permanently
deactivated when using
an external condensate
drain.
Implementation
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL (SIGNAL) button and hold
down for approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
(SIGNAL) display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL (SIGNAL) and SENSITIVE
(SENSITIV) buttons at the same time and hold down for
approx. 5 seconds.
The current setting appears on the multi-display:
– C0: Setting for drier laundry
– C1: Standard setting
– C2: Setting for damper laundry
3. Press the START/PAUSE button until the setting required
appears on the multi-display.
4. Turn the programme selector to OFF (AUS).
The setting is permanently programmed.
1. Turn the programme selector to any programme.
2. Press the DOOR (TÜR) and SPECIAL CARE (SCHON) but-
tons at the same time and hold down for approx. 5 sec-
onds. The multi-display briefly displays "0"
The EMPTY WATER (BEHÄLTER) display is permanently
deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays "1" (rather than
"0").
23