AEG LAVATHERM 86580IH 사용자 설명서 - 페이지 12
{카테고리_이름} AEG LAVATHERM 86580IH에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 86580IH 24 페이지. Aeg lavatherm 86580ih
AEG LAVATHERM 86580IH에 대해서도 마찬가지입니다: 사용자 설명서 (32 페이지)
페이지 인쇄
12 www.aeg.com
7.5 Setting a programme
Use the programme dial to set the pro-
gramme. The possible time to complete
the programme come into view on the
display.
The drying time you see is rela-
ted to the load of 5 kg for cotton
and jeans programmes. For the
other programmes the drying
time is related to the recommen-
ded loads. The drying time of the
cotton and jeans programmes
with the load more than 5 kg is
longer.
7.6 Special functions
Together with the programme you can
set 1 or more special functions.
To activate or deactivate the function
push the applicable push button.
When the function is activated the appli-
cable symbol comes into the view on the
display.
7.7 The Dry Plus function
This function helps to get the laundry
more dried. There are 3 possible selec-
tions:
minimum - the default selection which is
related to the programme.
moderate — the selection to get the
more dried laundry.
maximum — the selection to get the
much more dried laundry.
7.8 The Anticrease function
Extends of 30, 60, 90 or 120 minutes the
standard anticrease phase (30 minutes)
at the end of the drying cycle. This func-
tion prevents the laundry from creases.
The laundry can be removed during the
anticrease phase.
7.9 The Spun at RPM function
This function helps to set the best condi-
tion to dry the laundry. If you know the
initial spin speed when you washed you
can use this function. Higher spin speed
causes that the laundry contains less wa-
ter.
7.10 The Buzzer function
When the buzzer function is activated
you can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.
7.11 The Time Drying function
Operates only with the Time pro-
gramme. Lets the user to set special
time of drying programme from mini-
mum 10 min. to maximum of 2 hours (in
10 min. steps).
7.12 The Delay Start function
Let to delay the start of a drying
programme from minimum of 30
minutes to maximum of 20 hours.