AEG LAVATHERM 8DEA866C 사용자 설명서 - 페이지 24

{카테고리_이름} AEG LAVATHERM 8DEA866C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 8DEA866C 36 페이지.

www.aeg.com

12.11

Factory Reset restores the settings to the

state where it was made out in the

factory.

To activate the factory reset :

1. Tap on the Factory Reset bar.

The dialog window pops up.

Do you want to clear all your

programmed settings?

Cancel

13. HINTS AND TIPS

13.1 Ecological hints

• Spin the laundry well before drying.

• Do not exceed the load sizes which

are specified in the programs chapter.

• Clean the filter after each drying

cycle.

• Do not use fabric softener to wash

and then dry. In the tumble dryer

laundry becomes soft automatically.

14.1 Cleaning the filter

At the end of each cycle the message

Clean the lint filter comes on the

display and you must clean the filter.

The filter collects the fluff

during the drying cycle.

1. Open the door. Pull the filter up.

2. Push the hook to open the filter.

Factory Reset

2. To confirm the factory reset tap on

OK or Cancel to leave the current

settings.

• Use distilled water like that used for

steam ironing. If it is necessary, clean

the distilled water before (e.g. with a

coffee filter) to remove any particles.

• Always keep the airflow slots at the

bottom of the appliance clear.

• Make sure there is good airflow where

the appliance is to be installed.

3. Use a moist hand to clean both parts

of the filter.