AEG LAVATHERM 9DEC87S 사용자 설명서 - 페이지 27

{카테고리_이름} AEG LAVATHERM 9DEC87S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG LAVATHERM 9DEC87S 48 페이지.

To start the program:

Touch the Start/Pause button.

The appliance starts and the LED above the button stops flashing

and stays on.

8.9 Program change

To change a program:

1. Push the On/Off button to turn the appliance off.

2. Push the On/Off button again to turn on the appliance.

3. Set a new program.

Clean the filter and drain the water container after each drying

cycle. (See chapter CARE AND CLEANING.)

If the drying cycle is finished, the symbol

If the Buzzer option is activated, the acoustic signal sounds

intermittently for 1 minute.

If you do not turn off the appliance, the anti-crease phase starts

(not active with all programs). Flashing

execution of the anticrease phase. Laundry can be removed

during this phase.

To remove the laundry:

1. Push the On/Off button for 2 seconds to turn the appliance off.

2. Open the appliance door.

3. Remove the laundry.

4. Close the appliance door.

DAILY USE

appears on the display.

symbol signals the

27/48