AEG T6DBG822N 사용자 설명서 - 페이지 21
{카테고리_이름} AEG T6DBG822N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG T6DBG822N 28 페이지.
AEG T6DBG822N에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)
페이지 인쇄
Problem
The tumble dry‐
The filter is clogged. The emergen‐
er does not heat
cy heater shutdown.
up. The laundry
inside is cold
and wet.
Display shows 1
The filter is clogged. The emergen‐
min or few mi‐
cy heater shutdown.
nutes to the cy‐
cle end for lon‐
ger time. The
laundry inside is
cold and wet.
Incorrect program selection.
The filter is clogged.
Dryness Level option was set to
The load was too large.
Unsatisfactory
drying result.
The airflow slots are clogged.
There is some dirt on the humidity
sensor in the drum.
The dryness level was not set to
the desired level.
The condenser is clogged.
The filter is not locked into posi‐
The loading
tion.
door does not
Laundry is trapped between the
close
door and the seal.
It is not possible
After a cycle starts it is not possi‐
to change the
ble to change the program or op‐
program or op‐
tion.
tion.
It is not possible
The option you tried to select is not
to select an op‐
available for the selected program.
tion. An acoustic
signal is emit‐
ted.
Possible cause
3)
iron dry .
Remedy
1)
Clean the filter.
1)
Clean the filter.
Select a suitable program.
1)
Clean the filter.
Change Dryness Level option to a
higher level.
Do not exceed the maximum load
size.
Clean the airflow slots at the bot‐
tom of the appliance.
Clean the front surface of the
drum.
Adjust the dryness level.
Clean the condenser.
Put the filter in the correct position.
Remove trapped items and close
the door.
Turn the tumble dryer off and on.
Change the program or option as
required.
Turn the tumble dryer off and on.
Change the program or option as
required.
ENGLISH
21
2)
4)
1)