AEG TR939M4OBC 사용자 설명서 - 페이지 23
{카테고리_이름} AEG TR939M4OBC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG TR939M4OBC 36 페이지.
페이지 인쇄You can activate the child lock option:
• before you touch the Inicio/Pausa
button - the appliance cannot start
• after you touch the Inicio/Pausa
button - programs and option
selection is unavailable.
Child lock option activation:
1. Turn the dryer on.
2. Select 1 of the available programs.
3. Touch and hold down Anti-arrugas/
Rugas button by around 3 seconds.
The symbol
appears on the display.
4. To deactivate the child lock, touch
the above button again until the
symbol disappears.
9.9 Starting a program
To start the program:
Touch the Inicio/Pausa button.
The appliance starts and the LED above
the button stops flashing and stays on.
9.10 The ProSense load
detection
The ProSense The
ProSense technology
detects the laundry load size
defining the programme
duration.
After setting a drying programme, the
icon lights up on the display
if the programme supports it.
Touching the Inicio/Pausa button, the
ProSense starts the laundry load
detection:
1. The appliance detects the load in the
first minute: the indicator flashes, the
bars under the icon move back and
forth
and the drum rotates
shortly.
2. When the drum stops rotating, the
display shows the new programme
duration adjusted according to the
detected load. The number of bars,
from 1 to 4, represents the estimated
load amount. 4 bars represent the
maximum load amount for the
selected programme.
In case of drum overload,
the maximum declared load
indicator comes on again
with the
blinking. In this case, during
these 30 seconds, it is
possible to open the door
and remove the exceeding
garments. Once removed,
touch the Inicio/Pausa
button to start the
programme again. If the
laundry amount will not be
reduced, the programme
starts anyway. In this case, it
will be not possible to
guarantee the best results.
9.11 Program change
To change a program:
1. Push the On/Off button to turn the
appliance off.
2. Push the On/Off button again to turn
on the appliance.
3. Set a new program.
ENGLISH
23
indicator