Kohler Sterling 71040110 설치 매뉴얼 - 페이지 12

{카테고리_이름} Kohler Sterling 71040110에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Sterling 71040110 44 페이지. Baths, afd baths, and wall surrounds

7. Apply Silicone Sealant

IMPORTANT! Use a clear 100% silicone sealant. Latex, caulk, or siliconized latex sealants may not provide

water and mildew resistance over the life of the product.

IMPORTANT! Do not allow the sealant to set before the end walls are installed. After applying the

sealant, immediately proceed to the "Install the Wall Surrounds" section of this guide.

NOTE: Sealant will compensate for out-of-plumb walls and exposure to water at the bath ﬂange area. The

sealant will be hidden when the wall surrounds are installed, and will eliminate future maintenance.

Clean and dry the outer few inches of the bath ﬂange where the end walls will be installed.

Apply an L-shaped bead of clear 100% silicone sealant at each outer end of the bath ﬂange where

the end walls will be installed. Apply the bead so it is a minimum of 1/4" (6 mm) wide and 1" (2.5

cm) by 4" (10.2 cm) long, as shown in the illustration.

1015404-2-D

4" (10.2 cm)

(2.5 cm)

1/4" (6 mm)

Apply clear 100%

silicone sealant

before installing

walls.

Sterling