Kohler Stillness K-14459 설치 매뉴얼 - 페이지 5

{카테고리_이름} Kohler Stillness K-14459에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Stillness K-14459 32 페이지. Accessories
Kohler Stillness K-14459에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (21 페이지), 설치 매뉴얼 (20 페이지)

페이지 인쇄

4. Anchor Installation

NOTE: You may need to disassemble some of the accessories. Some

accessories will be packed with the wall plate installed in the post.

Loosen the setscrew and remove the wall plate if needed.

Press and hold the legs of a wall anchor (provided) together and

insert the wall anchor legs into the hole. Insert all wall anchors

into the pre-drilled mounting holes.

With a hammer, carefully tap each wall anchor until they are

ﬂush with the ﬁnished surface.

If the wall anchor was inserted into a space between the studs, it

will be necessary to spread the wall anchor legs.

To spread the anchor legs, insert the supplied red key into the

wall anchor hole.

Repeat for all wall anchors inserted between studs.

Ensure that the wall anchors are ﬂush with the ﬁnished surface.

5. Wall Plate Installation

Orient the wall plate with the large slotted mounting hole down

and the smaller hole over the higher anchor.

Secure the wall plate with the supplied panhead screws.

Repeat at each wall plate location.

NOTE: The tissue holder may be installed horizontally or vertically.

Position the wall plate accordingly.

Kohler Co.

1013267-2-C