Kohler Stillness K-14461 설치 매뉴얼 - 페이지 5

{카테고리_이름} Kohler Stillness K-14461에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Stillness K-14461 20 페이지. Accessories
Kohler Stillness K-14461에 대해서도 마찬가지입니다: 설치 매뉴얼 (32 페이지), 주택 소유자 매뉴얼 (21 페이지)

페이지 인쇄

Drywall Between Studs

Pilot Holes

Toggle Anchors

Orient wall

plate.

Press and hold

legs together.

2. Install the Wall Plate(s)

NOTE: If the pilot holes are drilled into a stud, anchors are not

required. Proceed to the "Secure the Wall Plate(s)" subsection.

Install the Anchors

For installations to drywall between studs:

Press and hold the legs of the toggle anchor (provided) together,

then insert the toggle anchor legs into each pilot hole.

Using a hammer, carefully tap each toggle anchor into the

drywall until ﬂush against the ﬁnished surface.

For installations to tile:

Insert a ceramic anchor (provided) into each pilot hole.

Using a hammer, carefully tap each ceramic anchor into the

drywall. The ceramic anchor does not need to be ﬂush with the

tile surface.

Secure the Wall Plate(s)

Orient the wall plate with the small round mounting hole in the 6

o'clock position, as shown.

Secure the wall plate with the two screws (provided).

Kohler Co.

Tile

Screws

Orient

wall plate.

Screws

Pilot Holes

Ceramic

Anchors

1013267-2-E