Kohler Triton K-T7019 설치 매뉴얼 - 페이지 6

{카테고리_이름} Kohler Triton K-T7019에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Triton K-T7019 24 페이지. Bath/deck-mount faucet
Kohler Triton K-T7019에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 주택 소유자 매뉴얼 (21 페이지)

Kohler Triton K-T7019 설치 매뉴얼
Plug
Button
Screw
Handle
Assembly

4. Install the Handles

NOTE: The handle assembly shown may differ from your actual
product. The installation instructions still apply.
Insert a washer into the underside of each escutcheon.
Thread each escutcheon over each valve stem until it is snug
against the finished surface.
Slide a spline adapter half way down each valve stem.
Gently press the handle assembly marked "cold" with blue tape
onto the spline adapter on the right.
Gently press the remaining handle assembly onto the spline
adapter on the left.
Check for proper alignment of each handle assembly. If necessary,
remove the handle assembly, reposition the spline adapter on the
valve stem, then reinstall the handle assembly.
For vandal-resistant handle assemblies: Insert each
vandal-resistant button into the top of each handle assembly.
Right is blue; left is red.
Secure the handle assemblies with a screw.
For regular handle assemblies: Press the plug button over the
screw.
1011303-2-C
Vandal-Resistant
Screw
Vandal-
Resistant
Button
(Red/Blue)
Spline
Adapter
Valve Stem
Escutcheon
Washer
6
Kohler Co.