Kohler URBANITY 15096T-1 설치 지침 - 페이지 2

{카테고리_이름} Kohler URBANITY 15096T-1에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler URBANITY 15096T-1 4 페이지. Vanity top

페이지 인쇄

Install the Basin

Note! The lavatory tops must be installed on a cabinet or

matching metal stand (refer to Installation and User Guide

packed with the cabinet or stand for installation details).

Recommend Kohler metal square leg or Kohler bathroom

furniture for support or decoration.

Rough-in the supplies and the drain piping.

NOTE:

The supply stop handles cannot extend more than

76mm from the finish wall when in the open position.

Drill two 10mm hanger bolt holes at the marks on the wall.

The nylon anchors is needed for concrete wall (supplied).

Mount hanger bolts to the wall so approximately 65-75mm

of each bolt remains exposed.

NOTE:

1. Height dimensions marked in fig. 2 and fig. 3 could

be adjusted per your the vanity height or the actual

height of the console leg.

2. Other fastening devices of sufficient size and

strength may also be used.

URBANITY 1100mm Vanity

K-15096T

1100mm

K-15096T

1130444-T01-A

125

165

Wall Plug

Attachment

Bolt (x2)

K-15095T

805

380

205

700

Fig.#1

76mm

(

75mm

Waste

Outlet

Waste

Fig.#2

-2-

130

454

540

(

)

10mm

)

65-