Kohler Vintage K-7159-BV 설치 매뉴얼 - 페이지 5

{카테고리_이름} Kohler Vintage K-7159-BV에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Vintage K-7159-BV 21 페이지. Bath drains

3. Install Overflow Elbow

- Remove the O rings and lubricant from the package. Apply lubricant

to the O rings.

- Assemble the O rings into the grooves of the overflow elbow.

- Apply more lubricant to the O rings and overflow elbow.

- Insert the overflow elbow into the overflow tube.

- Attach the black gasket to the overflow elbow, as shown.

- Apply a ring of plumbers putty or other sealant, according to the

manufacturer's instructions, to the front side of the gasket (putty will

be between the gasket and the bath).

- Align the overflow elbow with the overflow hole in the bath. From

inside the bath, tighten the retainer nut to the overflow elbow.

- Tighten all coupling nuts on the tee to secure the assembly.

- Apply thread sealant tape to the tailpiece threads.

- Thread the tailpiece onto the tee and tighten securely.

- Make sure the tailpiece on the drain fits properly into the trap. The

tailpiece may need to be cut for proper fit. 1" (2.5cm) to 2" (5cm) of the

tailpiece should fit inside the trap.

Kohler Co.

Black Gasket

Overflow

Elbow

Overflow

Tube

1018153-2-