Kohler Archer K-1122-G-0 러프인 매뉴얼 - 페이지 2

{카테고리_이름} Kohler Archer K-1122-G-0에 대한 러프인 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Archer K-1122-G-0 4 페이지. Bath with airjets
Kohler Archer K-1122-G-0에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (29 페이지)

페이지 인쇄
Kohler Archer K-1122-G-0 러프인 매뉴얼
16"
(40.6 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2"
Bath Drain
Product Information
Applicable product:
Drop-in rim style
Fixture*:
Bathing well:
Basin area bottom
45-1/8" (114.6 cm) x 19-11/16" (50 cm)
Basin area top
52-3/4" (134 cm) x 25-5/16" (64.3 cm)
Weight
84 lbs (38.1 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
58 gal (219.5 L)
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
58-1/2" (148.6 cm) x 30-1/2" (77.5 cm)
Blower motor:
Heater
300 W
Required accessories:
Clearflo slotted overflow brass bath
drain or
Clearflo slotted overflow bath drain –
PVC pipe
1064184-1-E
60" (152.4 cm)
4-1/8"
3/4" (1.9 cm)
(10.5 cm)
K-1122-G
V
Hz
A
120
60
5
K-7271
K-7272
No change in measurements if connected
with drain illustrated. (K-7272)
Blower Motor Access
20" (50.8 cm) W x
15" (38.1 cm) H
19"
(48.3 cm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor:
Blower motor is supplied with a 24" (61 cm) grounding-type
plug-in cord.
Notes
Install this product according to the installation guide.
Floor support under product must provide for a minimum of
45 lbs/square foot (218 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with overhead shower.
The hot water supply should be 70% of capacity or greater.
Installations will vary.
A blower motor access panel is required.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
32" (81.3 cm)
120 V, 15 A, 60 Hz
Kohler Co.