Kohler Archer K-1125 설치 매뉴얼 - 페이지 6

{카테고리_이름} Kohler Archer K-1125에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Archer K-1125 21 페이지. Flanged acrylic bath with integral apron
Kohler Archer K-1125에 대해서도 마찬가지입니다: 사양 (2 페이지), 설치 및 관리 매뉴얼 (29 페이지), 설치 및 관리 매뉴얼 (25 페이지)

페이지 인쇄

6. Complete the Installation

NOTE: Models with an integral apron are designed so the ﬁnished wall material [1-1/2" (3.8 cm)

maximum] will overlap the apron columns. The ﬁnished ﬂoor material [2" (5.1 cm) maximum] should butt

up against the apron.

Carefully remove the protective tape from the bath rim.

If necessary allow for deck mounted valves and spout.

Seal the joints between the bath rim edges and the water-resistant wall material with silicone

sealant. Tape and mud the water-resistant wall material.

Install the ﬁnished wall. Seal the joints between the bath rim and the ﬁnished wall with silicone

sealant.

Install the faucet trim according to the faucet manufacturer's instructions.

Clean-Up Procedures

CAUTION: Risk of product damage. Do not allow cleaners containing petroleum distillates to remain

in contact with the surface for long periods of time.

CAUTION: Risk of product damage. Do not use abrasive cleaners, as they may scratch and dull the

bath surface. Use warm water and a liquid, non-abrasive detergent to clean the surface.

CAUTION: Risk of product damage. Do not use metal scrapers, wire brushes, or other metal tools to

remove stains, paint, plaster, or tar. Use turpentine or paint thinner to remove stains, paint, or tar. Use

a powder-type detergent on a damp cloth to provide mild abrasive action to any residual plaster.

Clean and rinse the bath completely with water immediately after applying cleaners. Rinse and dry

any overspray that lands on nearby surfaces.

1014139-2-D

Water-Resistant

Wall Material

Bath

Framing

Finished

Wall

Apply silicone

sealant to the

joint between the

bath and the

finished wall.

Kohler Co.