Kohler Ceric K-8335-0 설치 지침 매뉴얼 - 페이지 12

{카테고리_이름} Kohler Ceric K-8335-0에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Ceric K-8335-0 40 페이지. Freestanding bath

9. Complete the Installation – 5" Drain

Gasket

CAUTION: Risk of property damage. Provide a watertight seal on all drain connections.

NOTE: The drain cover and gaskets are included in a small box located within the carton.

Choose the thin gasket for PVC drain pipes or the thick gasket for brass pipes.

Apply 100% silicone sealant to the inside and outside surfaces of the gasket to act as a lubricant.

Use a rubber mallet and short section of 1-1/2" PVC pipe to install the gasket onto the drain pipe inside the drain body.

NOTE: To ensure proper drain cover operation, the gasket must sit below the drain body slots.

Align the tabs on the drain cover with the slots in the drain body and insert the drain cover.

Press the drain cover several times to verify that the drain opens and closes properly.

If desired, apply a thin, continuous bead of clear or color-matched silicone sealant to the seam between the bath and

the finished floor.

Install the bath filler following the faucet manufacturer's instructions.

Close the bath drain.

Fill the bath to the overflow and check the drain connections for leaks.

1420044-2-C

Drain

Cover

Drain

Body

Drain Pipe

Tab

Slot

Optional

Kohler Co.