Kohler EVOK 22160A-0 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Kohler EVOK 22160A-0에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler EVOK 22160A-0 6 페이지. Freestanding back-to-wall bath

SITE REQUIREMENTS

Subfloor

Preparation

Check the flooring under the bath, and make repairs as necessary. Make sure the subfloor is level. It is strongly

recommended to prepare a waterproof layer for the subfloor beforehand. It may be necessary to plan for a

channel in the floor to allow space for a trap, see cross section of the Evok bath and waste below:

BEFORE INSTALLING UNIT

A. Protect the Bath Unit

Position a protective covering underneath the bath and be careful not to scratch the bath surface.

INSTALLATION

A. Locate the bath in the proposed position

With the bath in position, adjust the bath feet such that the bath is level and the base of the bath is

5mm from the finished floor.

Adjust the height of the bath

by tightening this nut.

42mm

5mm

Finished floor

Adjust this nut to lock / unlock the

adjustable feet.