Kohler EVOK K-18347T 설치 지침 - 페이지 3

{카테고리_이름} Kohler EVOK K-18347T에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler EVOK K-18347T 5 페이지. Freestanding acrylic bath

BEFORE INSTALLATION

A. Protect the Bath Unit

Cover the bath with a protective layer or similar

material. Be careful not to scratch the bath surface.

INSTALL THE BATH

A. Put the bath at desired position

1. Adjust the feet under the bath to make it level. Adjust

the height of the bath to the height marked in the

Roughing-In. Tighten the nut on the adjustable feet

to settle the height of the bath.

IMPORTANT:

The bath must be installed level on a flat and level

subfloor without any bumps or protrusions.

Adjust the height of the bath to the height marked in

the Roughing-In.

2. Place the base on the floor.

3. Fix the base on the floor with silicone sealant.

4. Apply silicone sealant around the tail end of the

drain hose. Connect the drain hose with floor drain.

Make sure the drain hose protrudes from the floor for

a certain length to facilitate future bath removal.

5. Connect cold and hot supplies and check all

connections for leak.

1119528-T01-C

-3-