Kohler Hourglass 30 K-1201 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} Kohler Hourglass 30 K-1201에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Hourglass 30 K-1201 20 페이지.

페이지 인쇄

6. PRODUCT NOTICES

A. INSTALLER HAZARD NOTIFICATION

DANGER: Risk of fire, electric shock, or injury

to persons. Read important safety instructions on

inside front cover of these instructions.

WARNING: Risk of electrical shock. A licensed

electrician should make all electrical connections.

WARNING: Risk of electrical shock. Connect

only to a circuit protected by a Ground-Fault

Circuit-Interrupter (GFCI).

WARNING: Risk of electrical shock. Disconnect

power before servicing.

WARNING: Risk of injury or property damage.

Please read all instructions thoroughly before

beginning installation, including the following

Product Requirements.

NOTICE: Follow all local plumbing and electrical

codes.

7. PRODUCT REQUIREMENTS

A. SUMMARY OF KEY REQUIREMENTS

S Install unit to a level subfloor.

S Provide properly dimensioned framing.

S Whirlpools are designed for a variety of installa-

tions, depending upon the model chosen.

S The optional apron must be installed before the

finish floor and wall materials are installed.

C. PRODUCT INSPECTION

Carefully unpack and inspect the whirlpool for damage.

Leave all materials in the carton during construction to

prevent damage.

NOTICE: Make sure both union connections to the

pump are securely tightened.

E. ELECTRICAL REQUIREMENTS

The installation must have a Class A Ground-Fault

Circuit-Interrupter (GFCI). The GFCI protects against

line-to-ground shock hazard. Use a 120 V, 15 A, 60 Hz

dedicated service for the whirlpool.

Kohler Co., Kohler WI

B. FACTORY-ASSEMBLED FEATURES

Factory installed components include pump with integral

timer and air switch transmitter. No installation is

needed.

The whirlpool pump and piping are factory-assembled.

WARNING: Unauthorized modification may

cause unsafe operation and poor performance

of the whirlpool. Do not relocate the whirlpool

pump, or make other modifications to the whirlpool

system, as this could adversely affect the

performance and safe operation of the whirlpool.

Kohler Co. shall not be liable under its warranty or

otherwise for personal injury or damage caused by

any such unauthorized modification.

B. PLUMBING SPECIFICATIONS

Confirm adequate support for the faucet; large faucets

that may be inadvertently used as a means of support

are not appropriate or safe for this installation.

D. CONNECTIONS AND SERVICE ACCESS

Before installation, ensure proper access to the final

connections.

NOTICE: Provide unrestricted service access to the

pump. An access panel must be constructed to allow for

sufficient clearance for servicing the pump or controls.

The access panel must be located at the pump end of the

whirlpool.

An optional removable apron is available for access to

the pump and controls. Additional access, however, may

make servicing of the pump and controls easier.

113867-2-

(-)