Kohler K-1114 러프인 매뉴얼 - 페이지 2

{카테고리_이름} Kohler K-1114에 대한 러프인 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1114 4 페이지. Bath with airjets
Kohler K-1114에 대해서도 마찬가지입니다: 주택 소유자 매뉴얼 (32 페이지), 주택 소유자 매뉴얼 (29 페이지), 설치 매뉴얼 (48 페이지), 주택 소유자 매뉴얼 (36 페이지), 러프인 매뉴얼 (4 페이지), 설치 매뉴얼 (44 페이지), 러프인 매뉴얼 (4 페이지), 설치 매뉴얼 (48 페이지), 설치 매뉴얼 (44 페이지), 주택 소유자 매뉴얼 (29 페이지)

Kohler K-1114 러프인 매뉴얼
21"
(53.3 cm)
3-3/4"
(9.5 cm)
11-1/16" (28.1 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Drop-in rim style
Drop-in, 4-side integral
flange
Drop-in cut-out dimensions:
70-1/2" (179.1 cm) x 40-1/2" (102.9 cm)
Fixture*:
basin area
Bathing well
55" (139.7 cm) x
23-1/4" (59.1
cm)
water depth
To overflow
15" (38.1 cm)
* Approximate measurements for comparison only.
Pump:
Hp
1-speed
1.25
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
1047185-1-B
72" (182.9 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1114
shown
K-1114-F
not shown
top area
weight
64" (162.6 cm) x
132 lbs
32" (81.3 cm)
(60 kg)
capacity
78.5 gal (297 L)
V
Hz
A
120
60
7.5
required
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
1-1/4"
(3.2 cm)
Tile Flange
Pump/Control Access
1-1/2"
(3.8 cm)
19-1/2"
(49.5 cm)
1-1/2" OD
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 80
lbs./square foot (390 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
Detail
42" (106.7 cm)
Kohler Co.