Kohler K-1124P 설치 매뉴얼 - 페이지 11

{카테고리_이름} Kohler K-1124P에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1124P 48 페이지. Bath with airjets and integral apron canada
Kohler K-1124P에 대해서도 마찬가지입니다: 설치 매뉴얼 (48 페이지)

페이지 인쇄

Purge Mode

Increases Flow

On/Off

Decreases Flow

8. Test Run the Bath with Airjets

For information on unit operation, refer to the "Conﬁrm Proper Operation" section.

Check all electrical connections, and make sure the electrical power to the bath with airjets is on.

Make sure all piping connections in the air harness are secure.

Verify that the blower motor is secure.

Temporarily remove the plastic drop cloth or other protective sheeting from the bath.

Fill the bath to a level at least 2" (5.1 cm) above the top of the highest airjet.

Check the drain piping for leaks. Repair any leaks.

Operate the bath and check for air ﬂow through the airjets. Check the air piping for air leaks.

Stop the bath and drain the water.

Return the plastic drop cloth or other protective sheeting to the bath.

Kohler Co.

1040293-2-E