Kohler K-1124P 설치 매뉴얼 - 페이지 3

{카테고리_이름} Kohler K-1124P에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1124P 48 페이지. Bath with airjets and integral apron canada
Kohler K-1124P에 대해서도 마찬가지입니다: 설치 매뉴얼 (48 페이지)

페이지 인쇄

Product Information (cont.)

Product Notices

NOTICE: Keep the area around the blower motor clean and free of debris. Ensure that the area around the

blower motor is free of sawdust, insulation, dirt, or other small loose debris. Such material could clog the

blower motor air ducts and reduce the air ﬂow through the blower.

Factory-Assembled Features

Factory installed components include blower motor with power supply cord, check valve, air piping, user

keypad, and keypad cable. Other than power wiring and plumbing, no assembly is needed.

Connections and Service Access

NOTICE: Provide unrestricted service access to the blower motor and check valve. The access must be

located immediately next to the blower motor. Study the roughing-in information packed with the bath.

Before installation, ensure that there is proper access to the blower motor and ﬁnal connections. If the blower

motor is installed in an enclosed area, an access panel is required at the blower motor. This panel should be

18" (45.7 cm) wide and 14" (35.6 cm) high minimum.

Kohler Co.

1040293-2-E