Kohler K-1145 설치 매뉴얼 - 페이지 4

{카테고리_이름} Kohler K-1145에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1145 25 페이지. Drop-in
Kohler K-1145에 대해서도 마찬가지입니다: 설치 및 관리 매뉴얼 (29 페이지), 설치 매뉴얼 (25 페이지)

페이지 인쇄

Clear

spaces for

support

blocks

3. Secure the Bath to the Subﬂoor – Models With Support Blocks Only

CAUTION: Risk of product damage. Do not support the bath by the rim.

Choose the installation option that best applies to your particular installation.

If the subﬂoor is not level, shim the bath support blocks as necessary.

Secure Using Cement or Mortar Bed Option

Spread a 2" (5.1 cm) thick layer of cement or mortar on the subﬂoor where the bath will be placed.

This will help secure, level and support the bath.

NOTE: The support blocks must rest directly on the support ﬂoor.

Clear all the material away from the support block locations.

NOTE: Do not use gypsum cement or drywall compound for this application, as they will not provide an

acceptable, durable bond.

Position a piece of plastic drop cloth or similar material over the cement or mortar bed.

With help, carefully lift the bath into place and make sure the support blocks do not rest in the bed

material. Verify that the bath is level and resting on all support blocks.

Insert the drain tailpiece into the trap.

NOTE: An access panel will simplify future maintenance.

Secure Using Construction Adhesive Option

Apply a generous amount of high-quality construction adhesive to the bottom of the support blocks.

With help, carefully lift the bath into place and make sure it is level and resting on all support

blocks.

Insert the drain tailpiece into the trap.

NOTE: An access panel will simplify future maintenance.

1016757-2-C

Spread a 2"

(5.1 cm) layer

of cement or

mortar bed

material

Apply construction

adhesive to the

support blocks

Kohler Co.