Kohler K-1153 주택 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Kohler K-1153에 대한 주택 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-1153 48 페이지. Vibro-acoustic baths

Using Your Remote Control

NOTE: Your remote control requires two AAA batteries. To install or replace them: Unthread the bottom

cap from the remote. Insert the batteries. Resecure the bottom cap to the remote.

NOTICE: You must synchronize the remote control before initial use.

Programming

NOTE: Perform the following at the user interface.

Press the [OK Icon] at the Main Menu on the user interface.

Scroll down to "System" at the Settings Menu, then press the [OK Icon].

Scroll down to "Remote" at the System Menu, then press the [OK Icon].

At the "Learn" ﬁeld, press the [OK Icon].

As instructed on the Remote Menu, simultaneously press and hold the [Back Icon] and [Up Icon] on

the remote control for 3 seconds. The remote LED will blink while in programming mode. To exit

programming mode, press the remote Power button.

Operating

Once the remote control is synchronized, you may use it to navigate through the user interface

menus while bathing.

[On/Off Icon]: Powers the user interface "ON" or "OFF." (1)

[Select Icon]: Selects the action the cursor is on within a menu. (2)

[Back Icon]: Prompts the previous menu. (3)

[User Icon]: Prompts the User Menu to appear. (4)

[Up/Down Icon]: Scrolls the cursor up or down on the current menu. (5)

1078022-5-B

Programming

Operating

Kohler Co.