Kohler Sterling Unwind 96134-0 설치 매뉴얼 - 페이지 5

{카테고리_이름} Kohler Sterling Unwind 96134-0에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler Sterling Unwind 96134-0 28 페이지. Seamless freestanding bath

Temporary

Blocks

3. Prepare the Bath

NOTICE: Provide adequate ﬂoor support.

Make sure that the subﬂoor is level and offers adequate support for the bath.

IMPORTANT! To ensure a successful installation, install the bath on a level ﬁnished ﬂoor.

With help, set the bath onto wood blocks in the installation location. Position the blocks at each end

of the bath.

Verify that the bath drain aligns properly with the drain pipe or elbow.

Disassemble the drain from the bath.

For a rim-mount faucet, install the faucet and trim according to the faucet and trim instructions.

Make sure that there is adequate support under the bath rim to support the faucet. Refer to the

"Prepare the Rim-Mount Faucet (Optional)" section.

IMPORTANT! The feet must extend past the bath shell and be level with each other so that the weight of

the bath is evenly supported by all four feet.

Adjust the feet so that the bottom of each foot protrudes approximately 1/8" (3 mm) to 3/16" (5

mm) from the underside of the bath.

With help, remove the wood blocks and set the bath on the ﬂoor.

Check that the bath is level and resting on all four feet. Adjust the feet as necessary.

Sterling

1396992-2-A