Kohler System II K-809 설치 매뉴얼 - 페이지 8

{카테고리_이름} Kohler System II K-809에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler System II K-809 28 페이지. Drop-in bath whirpool

9. Complete the Finished Deck

- If you have not already done so, carefully remove the protective tape from the whirlpool rim.

- Cover the framing with water resistant deck material. Seal the joints between the whirlpool rim edge and the

water resistant deck material with silicone sealant.

- Tape and mud the water resistant deck material. Install the finished deck to the water resistant deck material. Seal

the joints between the whirlpool rim and the finished deck material with silicone sealant.

- Install the faucet trim according to the instructions packed with the trim.

- When cleaning up after installation, do not use abrasive cleansers, as they may scratch and dull the whirlpool

surface. Use warm water and a liquid detergent to clean the surface.

- Remove stubborn stains, paint, or tar with turpentine or paint thinner. Do not allow cleaners containing

petroleum distillates to remain in contact with any whirlpool surfaces for long periods of time. Remove plaster

by carefully scraping with a wood edge. Do not use metal scrapers, wire brushes, or other metal tools. Use a

powder type detergent on a damp cloth to provide mild abrasive action to any residual plaster.

1011606-2-

Finished

Deck

Material

Apply silicone

sealant to the edges

of the water-resistant

deck material and

the finished deck

Water-Resistant

Deck Material

Framing

Whirlpool

Kohler Co.