Kohler ADAIR K-4636T-U 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Kohler ADAIR K-4636T-U에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler ADAIR K-4636T-U 8 페이지. 4.0l exposed class five one-piece toilet
Kohler ADAIR K-4636T-U에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (10 페이지)

페이지 인쇄

To install supply shut-off valve

Install toilet supply shut-off valve so it is 140mm above

floorline and 135mm to the left of the centerline of the

closet flange. Centerline of supply shut-off outlet should

extend 102mm from finished wall. Install the supply shut-

off valve with outlet vertcial.

135mm

Install the wax seal.

NOTE 1:

Wax ring type toilet gasket should not be installed at

temperatures less than 21 .

NOTE 2:

If you are using a toilet gasket with an integral

plastic sleeve, make sure the gasket is positioned with the

sleeve facing away from the toilet.

If you temporarily plugged the closet flange with a rag,

remove the rag at this time and ensure that the drain pipe is

clear and free of debris.

Apply weight evenly.

Do not move after placement!

Watertight seal may be broken!

1264349-T01-A

140mm

102mm

140

305

Wax Seal

Install floor mounting kit as shown in the figure.

overtighten.

-4-

Supply Shut-Off Valve

135

Closet Flange

Centerline

This side up.

Do not