Kohler ADAIR K-75925T 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Kohler ADAIR K-75925T에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler ADAIR K-75925T 10 페이지. 4.0l exposed class five one-piece toilet
Kohler ADAIR K-75925T에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (8 페이지)

페이지 인쇄

Install brackets.

Firmly press the toilet gasket onto the

toilet outlet of plastic trap.

NOTE 1:

Wax ring type toilet gasket

should not be installed at temperatures

less than 21 C.

NOTE 2:

If you are using a toilet

gasket with an integral plastic sleeve,

make sure the gasket is positioned

with the sleeve facing away from the

toilet.

Install plastic to ground and mounted

with 3 set of bolts firmly.

NOTE: Must use the toilet installation

gasket ring (not supplied) to seal the

area where the waste pipe contacts

the construction section to avoid

leakage.

Carefully align and lower the bowl.

Apply weight to the bowl rim to let the

outlet insert into plastic trap.

Carefully thread the screws into the

brackets, until toilet is secure.

Alternately tighten left and right sides

to prevent pulling the toilet off center.

Install cap to cover screw.

Do not overtighten.

1285052-T01-A

Fig.#6

Plastic Trap Outlet

Fig.#7

Fig.#8

Outlet

Plastic Trap

Fig.#9

Bushing

Screw

Cap

Fig.#10

-5-

Toilet Gasket

)

(