Kohler AERODYNE K-3869T-SE 설치 지침 - 페이지 4

{카테고리_이름} Kohler AERODYNE K-3869T-SE에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler AERODYNE K-3869T-SE 8 페이지. Aerodyne 3.3/4.8l class five+

페이지 인쇄

TO INSTALL SUPPLY

SHUT-OFF VALVE

Install the supply shut-off valve so it is

67mm (2-5/8") above the finished floor

line, and 194mm (7-5/8") to the left of

the closet flange centerline.

The centerline of the supply shut-off

valve outlet should extend 67mm

(2-5/8") from the finished wall. Install

the supply shut-off valve with the outlet

vertical.

TO INSTALL BOWL

Position the template and align with

drain hole.

Mark down the position of foot and 5

holes.

Drill holes on ground with the drill of

10mm (3/8"), then insert anchor to

holes.

CAUTION: Please make sure there is

no water pipe or spool under the 5

holes to be drilled.

Install brackets.

Firmly press the toilet gasket onto the

toilet outlet of plastic trap.

NOTE 1:

Wax ring type toilet gasket

should not be installed at temperatures

less than 21 C.

NOTE 2:

If you are using a toilet

gasket with an integral plastic sleeve,

make sure the gasket is positioned

with the sleeve facing away from the

toilet.

1195897-T01-G

Supply Shut-Off Valve

200

Closet Flange

Centerline

Fig.#3

Drain Hole

Fig.#4

Fig.#5

Fig.#6

Plastic Trap Outlet

Toilet Gasket

Fig.#7

-4-

10mm

3/8

10mm

194

67mm;