Kohler C3-430 주택 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Kohler C3-430에 대한 주택 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler C3-430 32 페이지. Nightlight heated elongated cleansing toilet seat
Kohler C3-430에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (45 페이지), 설치 매뉴얼 (16 페이지), 주택 소유자 매뉴얼 (39 페이지), 매뉴얼 (2 페이지)

페이지 인쇄

Button-Holding Function Introduction

Lighting (ON/OFF)

Hold Front button for 2 seconds to activate or deactivate lighting function.

OFF: long beep, light turns off.

ON: short beep, light ia affected by light (bright when external light is weak, other-

wise turned off)

Energy save (switch among 3 modes)

Hold Heating button to cyclically enter the 3 modes.

No Energy Save mode: Long beep, light flashes once. Then exit the Energy Save

mode.

General Energy Save mode: One beep, light flashes slowly. Then enter the Gen-

eral Energy Save mode.

Deep Energy Save mode: One beep, light flashes twice. Seat temp and water

temp are deactivated. Then enter the Deep Energy Save mode.

Standby mode

Hold the Stop button for 2 seconds to enter standby mode and stop seat heat-

ing function, so as to minimize energy consumption.

Press any button on the side panel or sit on the seat to exit standby mode auto-

matically with all functions recovered.

Manual wand cleaning

Hold the Rear button for 2 seconds to clean the wand manually.

Preparations Before inital Operations

Ensure if water inlet valve is OPEN

Connec water inlet hose according to installation Guide. Open water stop valve, and

plug power cord.

Plug power cord into socket. Bidet seat generates one short beep, wand extends

and retracts once, and the indicator on the side panel blinks until initialization com-

pletes.

During initialization, it is normal to hear motor rotating and water flow.

Test according to "USE GUIDE" section

Factory setting for initial use.

Front wash:

Rear wash:

1349981-X5-A

• Water flow: Mid

• Spray position: Mid

• Water flow: Mid

• Spray position: Mid

Water temp: Mid

Seat temp: Mid

Lighting: ON

Energy save: OFF

Kohler Co.