Kohler C3-520 주택 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Kohler C3-520에 대한 주택 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler C3-520 41 페이지. Smart seat
Kohler C3-520에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (33 페이지), 설치 매뉴얼 (17 페이지)
페이지 인쇄
J - POSITION
Press wand POSITION button to activate wand move function in the
flush state; press POSITION button again to change wand position,
the position shall be circulated per MIN, MIN-MID, MID, MID-MAX,
MAX, MID-MAX distance sequence.
K - SANITIZE
Activate sanitize function for 45min UV sanitizing by press SANITIZE
button when unseated. Press STOP button or seat on the Bidet to
stop this function.
Auto UV sterilization function will be activated and start sterilizing
nozzle when unseated for a long time. The process shall be 45min.
No sterilization function shall be activated after this process in another
24hrs.
*
UV sterilization (refers to the ultraviolet sterilization generated by UV lamp): During UV working cycle, the bacteria on nozzle
surface will be eliminated by irradiation. The antibacterial rate is more than 99%. (Measured after one UV working cycle, it
was measured within 20mm×8mm irradiation area. Perform test in accordance with GB /T 23131 requirements, UV radiation
zone was shown in the diagram, UV working cycle activation mode refers to users guide. Testing lab: China household
electrical appliances testing institute.)
L - USERS
Change over or preset users: each click shall change over to different
users and retrieve default set.
Storage:select user, hold USERS button to save 4 wash states, dryer
parameter and seat temp parameter. One short beep indicates
successful storage.
Installation instructions
Low
Low-mid
small
small indicator
indicator
lights up and
lights up
medium
indicator flashes
Kohler Co.
UV radiation range
Mid
small and
medium indicators
light up
simultaneously
Bidet nozzle
Mid-high
small and
medium indicators
light up; large
indicator flashes
9
High
small, medium
and large
indicators light up
simultaneously
1350325-KR01-A