Kohler EIR K-77795KR-EXRGD-0 주택 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Kohler EIR K-77795KR-EXRGD-0에 대한 주택 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler EIR K-77795KR-EXRGD-0 47 페이지. Intelligent toilet

페이지 인쇄
Kohler EIR K-77795KR-EXRGD-0 주택 소유자 매뉴얼
Remote setup instruction
G
Push and hold
button on toilet side panel until a short beep is generated, and release the button after night light
blink 3 times. Then press D/F/G/H/J/L/N to change setting accordingly.
D - Rear wash...Deodorizer function setting
Push and hold the button to activate or deactivate deodorizing function.
1. Night light quick blink once indicates activate deodorizer function (short beep).
2. Night light slow blink once indicates deactivate deodorizer function (long beep).
F - Flush full...auto flush setting
Push and hold the button to stop flushing function, restore auto flush when Push and hold the button again.
1. Night light quick blink once indicates activate auto flush function (short beep).
2. Night light slow blink once indicates deactivate auto flush function (long beep).
G - Cover OPEN/CLOSE...sensor distance setting
Push and hold to perform auto cover OPEN/CLOSE sensor area setting
1. Night light quick blink once indicates short distance (short beep)
2. Night light quick blink twice indicates medium distance (short beep)
3. Night light quick blink three times indicates short distance (short beep)
4. Night light slow blink once indicates deactivate auto cover OPEN/CLOSE function (long beep).
H - Seat OPEN/CLOSE...prolonged seating indication setting
Push and hold to enter prolonged seating indication function setting
1. Night light quick flash once (short beep), prolonged seating indication function activated;
2. Night light slow flush once (long beep), prolonged seating indication function deactivated.
J - Spiral wash...night light function setting.
Push and hold to enter night light function setting.
1. Short beep indicates night light function activated.
2. Long beep indicates night light function deactivated.
L - One button sterilization function...auto UV sterilization setting
Push and hold the button for UV auto sterilization ON/OFF status setting
1. Night light quick blink once indicates activate auto UV sterilization function (short beep).
2. Night light slow blink once indicates deactivate auto UV sterilization function (long beep).
N - Seat temp...energy saving setting
Push and hold seat temp button to activate energy saving function, push and hold the button to deactivate
function.
1. Night light quick blink once indicates activate energy saving function (short beep).
2. Night light slow blink once indicates deactivate energy saving function (long beep).
When there's no change on E/F/G/H/J/L
panel before change next time, until one short beep is generated and night light blink 3 times.
P. Position...nozzle clean setting
When unseated, push and hold button to activate manual nozzle clean function, nozzle extend, manual clean
the nozzle, then push and hold button or press STOP button to deactivate the function.
Kohler Co.
C
D
B
H
I
Q-
M
N
setting for a certain period of time, press button on toilet side
E
F
J
K
Q+
O
P
9
L
1373171-KR01-A