Kohler K-14224 설치 매뉴얼 - 페이지 7
{카테고리_이름} Kohler K-14224에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler K-14224 28 페이지. One-piece top-trip toilets
Kohler K-14224에 대해서도 마찬가지입니다: 설치 매뉴얼 (28 페이지), 주택 소유자 매뉴얼 (25 페이지)
페이지 인쇄
Fill Valve Nut
Comp. Washer
Supply Shank
Seal Washer
Tubing
Coupling
Comp. Nut
Nut
Comp. Nut
Supply Shut-Off
Valve
Ferrule
Supply Shut-Off Valve Connection
4. Connect the Supply and Make Adjustments
Connect the supply shut-off valve to the toilet supply shank.
Open the supply shut-off valve slowly to check for leaks. If the
connections have been properly assembled, a slight tightening of
the nuts should stop leakage.
Install the toilet seat according to the packed instructions.
Adjustments
Adjust the water level in the tank by squeezing and sliding the
C-clip on the float rod.
• To raise the water level, slide the C-clip up.
• To lower the water level, slide the C-clip down.
Test flush the toilet several times, while checking all connections
for leaks, to ensure proper operation.
If the flapper ball does not seat properly when the lift rod is
lowered, provide more flapper chain by:
• Relocating the flapper chain S-hook to the bottom hole in the lift
rod.
• Repositioning the flapper chain S-hook on the flapper chain.
Kohler Co.
C-Clip
Tubing
Coupling
Nut
Ferrule
Adjusting The Water Level
7
Waterline
1021796-2-A